Nessun prodotto
I prezzi sono IVA inclusa
Il prodotto è stato aggiunto al tuo carrello
Ci sono 0 articoli nel tuo carrello C’è 1 articolo nel tuo carrello
Model D, Original There are 23 products.
- 228,50 €
PM5 Monitor
Il nostro monitor delle prestazioni più avanzato. È dotato di un sistema wireless per il monitoraggio della frequenza cardiaca, la possibilità di memorizzare allenamenti in una pennetta USB flash drive (in vendita separatamente), e la retroilluminazione per una visibilità impeccabile anche in ambienti poco luminosi.
228,50 € - 76,71 €
Seat Complete Top, Frame & Rollers—Model...
For use on all Model C, D and E Indoor Rowers. Includes seat top, seat frame, seat rollers and hardware. See more info.
76,71 € - 42,85 €
Nickel Chain with Connectors
For use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connectors for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. See more info.
42,85 € - 34,16 €
Power Generator Assembly
For use with Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. See more info.
34,16 € - 29,28 €
Sensor Coil
For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. See more info.
29,28 € - 21,18 €
Indoor Rower Handle with Grips
Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.
21,18 € - 21,12 €
14 Tooth Quiet Sprocket—Model D and E
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time. See part number 1915. See more info.
21,12 € - 19,67 €
Seat Top with Screws
For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws (4) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney" shaped seat. See more info.
19,67 € - 18,30 €
- 15,86 €
Seat Roller, Top
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
15,86 € - 8,54 €
Shock Cord
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info. Note: Shock cord may be white or green.
8,54 € - 7,56 €
Flexfoot, Gray
7,56 € - 6,04 €
Seat Roller, Bottom
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...
6,04 € - 4,23 €
- 4,23 €
- 3,83 €
Return Mechanism Cover—Model C, D and E
For use on all Model C, D and E Indoor Rowers. This cover fits the underside of the main box frame to protect the return mechanism from dust and to keep little fingers and pets' tails safe from the moving parts inside. See more info.
3,83 € - 3,33 €
Footstrap
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram
3,33 € - 2,72 €
17mm Bearing—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. See more info.
2,72 € - 2,22 €
R8 Bearing—Model B, C, D, E, Dynamic
For use on all Model B, C, D, and E Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. See more info.
2,22 € - 2,22 €
Foot Cap
For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.
2,22 € - 1,46 €
Bearing Cover
For use with Model C and D Indoor Rowers and all SkiErgs Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel, and the back side of all SkiErgs.
1,46 € - 0,61 €
17mm Bearing Cup—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the rubber bearing cup that holds the 17mm bearing (part number 1300, sold separately). See more info.
0,61 € - 0,46 €
R8 Bearing Cup—Model C, D, E, Dynamic
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. See more info.
0,46 €
