skip to main content

Indoor Rowers There are 26 products.

Subcategories

per page
Showing 1 - 25 of 26 items
  • 1 670,00 €

    Il Dynamic Indoor Rower offre una simulazione più vicina al canottaggio sull'acqua ed è stato sviluppato per soddisfare le esigenze di allenamento specifiche dell'atleta di canottaggio. Viene fornito con un PM5. Supporto per smartphone incluso.

    1 670,00 €
  • 1 230,00 €

    La performance sempre attendibile del Concept2 RowErg lo ha reso il Best Seller mondiale dei vogatori. E’ disponibile in nero, con un monitor delle prestazione tra i più avanzati: il PM5.

    1 230,00 €
  • 228,50 €

    Il nostro monitor delle prestazioni più avanzato. È dotato di un sistema wireless per il monitoraggio della frequenza cardiaca, la possibilità di memorizzare allenamenti in una pennetta USB flash drive (in vendita separatamente), e la retroilluminazione per una visibilità impeccabile anche in ambienti poco luminosi.

    228,50 €
  • 34,16 €

    For use with Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. See more info. 

    34,16 €
  • 29,28 €

    For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. See more info.

    29,28 €
  • 21,18 €

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    21,18 €
  • 21,12 €

    For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time. See part number 1915. See more info.

    21,12 €
  • 19,67 €

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws (4) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney" shaped seat. See more info.

    19,67 €
  • 18,30 €

    For use on the Model D and E Indoor Rower.

    18,30 €
  • 15,86 €

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    15,86 €
  • 8,54 €

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info. Note: Shock cord may be white or green.

    8,54 €
  • 6,04 €

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    6,04 €
  • 5,04 €

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.

    5,04 €
  • 5,04 €

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.

    5,04 €
  • 3,33 €

    For use with updated Model D, Model E and Dynamic Indoor Rowers.  Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram

    3,33 €
  • 2,93 €

    For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present.

    2,93 €
  • 2,22 €

    For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.

    2,22 €
Showing 1 - 25 of 26 items